SPH-6M

TF0615/8

SP-100/8

SP-167E

SP-202E

SP-252C

SP-252E

CDPS-44SM

Seamless switching, Supports four different modes: Matrix mode/ Dual mode/ Quad / TV Wall mode--Matrix mode: Seamless switching 4 x 4.--Dual mode: 2 sources PiP or PoP on both outputs--Quad mode: all sources in quad view on one display--TV Wall mode: Can output any source to 4 displays (2 by 2 Video wall) with adjustable Bezel Correction, Supports OSD, RS232, Telnet, WebGUI, Remote control and on-panel controls, Input resolutions support VGA~WUXGA and 480i~1080p , Output resolutions support 480p~1080p, Supports different input resolution and output resolution selectable from OSD menu. The factory default value for the output resolution is 720p@60Hz/ 2CH LPCM, Audio supports LPCM 2CH, 6CH, 8CH/AC3/DTS/Dolby Digital Plus/ Dolby TruHD & DTS-HD

VEX-E2501T

HDMI 2.0 and DVI 1.0 compatible, HDCP 2.2 and HDCP 1.x compliant, HDBaseT 3.0 compliant (Backwards compatible with HDBaseT 2.0/1.0) , Supports 10-bit and 12-bit HDR (High Dynamic Range) input/output, HDBaseT feature support: HD Video and Audio, Bi-directional analog audio, and Control (bidirectional USB/IR/RS-232 pass-through) , USB 2.0 Type-A device ports and 1 Micro USB 2.0 host port, Supports providing PoH power from Transmitter to Receiver in same HDBaseT port.

CH-U331RX-W

Video, audio and control reception over TCP/IP in Unicast (point-to-point) or Multicast (single-to-many, many-to-many) modes, Support video wall with 180° and 270° rotation, Video output can be scaled to a selected resolution, or left unscaled, The analog Line In on a connected Transmitter will send audio directly to this Receiver’s analog Line Out as well as being embedded into the HDMI output signal, The Mic In on the Receiver sends audio directly to the analog Line Out on the Transmitter, May be powered directly by PoE when connected to a Gigabit Ethernet switch that provides PoE (802.3af), Includes 3 LAN ports, allowing multiple Receivers to be daisy chained without the need for an external Gigabit Ethernet switch, Supports USB keyboard, mouse and storage extension

CH-514TXLN

Supports distance up to 70m/229ft at 1080p and 40m/131ft at 4K, HDBaseT feature support: HD Video, Audio, and IR/RS-232 Control pass-through, Supports HDCP repeater and CEC bypass, Input/output resolutions up to 4K@60Hz (YUV 4:2:0, 8-bit) or 4K@30Hz(YUV 4:4:4, 8-bit), HDMI with 3D, 4K2K support, HDCP and DVI compliant, Supports pass-through of audio formats including LPCM 2.0/5.1/7.1, Bitstream and HD Bitstream over HDMI

CH-2527TX

HDMI with 3D & 4K support, DVI 1.0 compatible, Supports resolutions up to 4K@50/60Hz (4:2:0, 8-bit), Supports CEC bypass, Simultaneous transmission of uncompressed video, audio and data over a single 100m/328ft Cat.5e/6/7 cable at 1080p60 and 70m/230ft at 4K, HDBaseT feature support: HD Video and Audio, 100BaseT Ethernet, 48V PoH, and Control (bidirectional IR/RS-232 pass-through), Supports standard 48V PoH from Receiver (PSE) to Transmitter (PD) (compatible Transmitters only), Notes:The 48V PoH function is designed to power compatible Transmitter units only. Non-PoH Transmitters will need their own power supply. Other brands of Transmitter may not be compatible., The use of “Premium High Speed HDMI” cables is highly recommended for displaying 3D and 4K content and compatible display equipment is required.

SPX-30M

ST-400G

CLUX-11CD

 Compliant with HDMI, HDCP 1.2 and DVI 1.0,  Supports HDMI audio sampling rates up to 192 kHz,  Supports Optical S/PDIF sampling rates up to 48 kHz ,  Supports TMDS clock frequency rate 225 MHz,  Supports high-bit-rate (HBR) audio,  No HDMI output connection is required to receive audio at the analog and optical outputs ,  Maximum input and output HDMI cable length can run up to 15 meters at 1080p at 8-bit resolution ,  Low power consumption,  Supports EDID management for audio formats, can switch among builtin EDID (LPCM 2CH/Bitstream) and external EDID (TV) ,  Supports 3D signal